Made of two different foam materials                                                    Installation            

Like with all other "WSBK" filters this filter has also a increased filtersurface with 60% , what will have a positive effect on performance & protection . In contrast to the performance filter the WSBK filter is made from two different foam materials to spread the incoming air over the complete airbox so all four cylinders get the same amount of air . This means you need to approach the fuel adjustments the same way as the other WSBK filters : in this case you need to check & adjust front two and rear two cylinders seperate .

Remapping the ECU or installation of a fuel module is necessary

We increased the filter surface area with 50% what brings a very positive reaction to the bikes performance & protection . Developed in coorporation with BMW WSBK Superbike & Superbike "EVO" + Builbase BMW (BSB Superbikes). This filter is build from two different foam materials to create the same effect as with the splitterplate from the "HE" & "R" filters.

The extra surface with the two different foam materials.
The foam material used for our roadbikes is placed conscious on a certain place to create the same effect as the splitterplate on our "HE" & "R" filters , the rest is the foam material for the full racefilters .
For the fueling you need to approach the same way as with our "HE" & "R" filter . This means tune each cylinder seperate.and tune the secondairy injectors seperate from the main injectors.

The foam material used for our roadbikes is placed conscious on a certain place to create the same effect as the splitterplate on our "HE" & "R" filters , the rest is the foam material for the full racefilters .
For the fueling you need to approach the same way as with our "HE" & "R" filter . This means tune each cylinder seperate.and tune the secondairy injectors seperate from the main injectors.

The "WSBK" filter for the 899/1199 Panigale has been tested by several  top teams all around the world and has already proven to be the winning Championship filter . The OEM filter has a too small filter surface compared to the big engine / performance of the bike .

The extra surface with the two different foam materials.
The foam material used for our roadbikes is placed conscious on a certain place to create the same effect as the splitterplate on our "HE" & "R" filters , the rest is the foam material for the full racefilters .
For the fueling you need to approach the same way as with our "HE" & "R" filter . This means tune each cylinder seperate and tune the secondairy injectors seperate from the main injectors

Customized "WSBK" Race Airfilter

Ducati PANIGALE  V4 / S / R

With the introduction of the new Ducati V4R MWR introduce now the brand new “WSBK” racefilter for the Ducati V4/S/R . From the shape it’s not so different from the performance filter because there is not other way , the filter goes straight into a tunnel , main difference is that the filter is build up from two different foam materials to spread the incoming air over the complete airbox to create more equal fueling to all four cylinders , therefore you can refine all the adjustments .Which will bring the extra power and smoothness to the powercurve

The foam material used for our roadbikes is placed conscious on a certain place to create the same effect as the splitterplate on our "HE" & "R" filters , the rest is the foam material for the full racefilters .
To optimize the fueling you need to approach the same way as with our "HE" & "R" filter . Tune each cylinder seperate.and tune the secondairy injectors seperate from the main injectors.

The two brackets are separate (in OEM filter they are one with the filter) and included with all the filters , there is a left & right side .

The customized , very exclusive superbike filter for the ZX10R is developed in corporation with KRT and it increased the filter surface with 80% for much higher airflow and a better protection . This filter is also made from two different foam materials to create the same effect as with our "HE" & "R" filters.

All World Supersport teams tested this WSBK F3 filter , with all the same results : this WSBK filter is a step forward with the performance.All WSS teams have this filter in use . We decided to bring it in production and is now available for everybody .

The filter is build excentric , and build with two different foam materials to achieve a equal airflow to all three cylinders , when installed this filter you need to check & adapt the fueling on each cylinder seperate.

Be carefull when you slide the filter down that you not damage the foam , and that the foam is behind the barrier , if necessary help with your hands

Feetback from the teams :

3% extra fuel compared to the MWR Racefilter MC-061-12R . Three high velocity stacks are needed , the cheapest way is to swap the short OEM (middle) stack for a OEM high stack (see right picture).

The customized superbike filter for the GSXR 1000 increased the filter surface with 100% for much higher airflow and a better protection . This filter is also made from two different foam materials to create the same effect as with our "HE" & "R" filters.

The foam material used for our roadbikes is placed conscious on a certain place to create the same effect as the splitterplate on our "HE" & "R" filters , the rest is the foam material for the full racefilters .
For the fueling you need to approach the same way as with our "HE" & "R" filter . This means tune each cylinder seperate.

MWR-Customized "WSBK" Race Airfilter:
More & bigger surface means less restriction , a better protection and the performance increase is enormously. These new style WSBK filters are build with two different kind of foam materials . One part is foam material used for our roadbikes , the rest is the foam material for the full racefilters . The roadmaterial is placed on a conscious place to create the same effect as the splitterplate on our “HE” & “R” filters.

MWR-Customized "WSBK" Race Airfilter:
More & bigger surface means less restriction , a better protection and the performance increase is enormously. These new style WSBK filters are build with two different kind of foam materials . One part is foam material used for our roadbikes , the rest is the foam material for the full racefilters . The roadmaterial is placed on a conscious place to create the same effect as the splitterplate on our “HE” & “R” filters.

The customized , very exclusive superbike filter for the R1 increased the filter surface with 100% for much higher airflow and a better protection . This filter is also made from two different foam materials to create the same effect as with our "HE" & "R" filters.

2014 World Endurance Champions Yamaha GMT94 use and tested the filters this complete season with great succes .

The foam material used for our roadbikes is placed conscious on a certain place to create the same effect as the splitterplate on our "HE" & "R" filters , the rest is the foam material for the full racefilters .
For the fueling you need to approach the same way as with our "HE" & "R" filter . This means tune each cylinder seperate and tune the secondairy injectors seperate from the main injectors.

The shape of the filter is "adapted" to the airbox to make it as big as possible , very exclusive customized airfilter what increases the filtersurface enormously